Wide range of applications
Temperature And Humidity Chamber can simulate high temperature, low temperature, high humidity, low humidity, and is suitable for testing requirements in various fields and industries such as electronics, materials research, medicine, automobiles, food, etc.
Excellent both on control precision and uniformity of temperature and humidity
Temperature and humidity control precision: ±0.5℃; ±3％RH
Temperature and humidity uniformity: ±2℃; ±3.0％RH
Achieve heating and cooling quickly
When unloaded, it can achieve heating from room temperature to 100℃ within 30 minutes, It can also achieve cooling from room temperature to -20℃ within 60 minutes.
Intuitive and practical screen, easy to operate
The Temperature And Humidity Test Chamber has a 7-inch large touch screen that displays information in both Chinese and English. The set values (SV) and actual values (PV) of temperature and humidity are displayed directly, as well as the currently executing program number, segment information, remaining time, and number of cycles. It also has a separate program editing screen.
Stable operation, originated from high-quality insulation materials and humidifiers
The heating element is made of spring-type nickel-chromium wire,and the humidifier is a UL-shaped humidifier in the form of stainless steel electric steam generation.
High quality refrigeration system and refrigeration auxiliary parts
Tecumseh fully hermetic high efficiency compressor from France, solenoid valve from Japan, and pressure controller and oil separator of international famous brand.
A variety of safety protection
The burn prevention switch,the high-pressure protection for the compressor,the overheating protection for the compressor,
the over current protection for the compressor,the no-fuse switch protection,the short-term water shortage alarm and the long-term water shortage shutdown protection.
Various sizes can be customized
such as 80L, 150L, 225L, 408L, 800L, 1000L
The Specification of AtmoExplorer Temperature & Humidity Chamber
Temperature range： -20℃～+150℃
Humidity range：20-98%RH
Temperature and humidity control accuracy：±0.5℃；±3％RH
*Note: To achieve the performance above , it should be measured after 30 minutes of temperature stabilization.
Temperature and humidity distribution uniformity: ±2℃; ±3.0%R.H.
*Note: To achieve the performance above , it should be measured at 1/6 position from each wall of the test area, and need to be measured after 30 minutes of temperature stabilization.
Heating time: from room temperature to 100℃, within 30 minutes (when no load)
Cooling time: from room temperature down to -20℃, within 60 minutes (when no load)
Testable area: 500*750*600 mm (D*W*H)
Test box door: a total of 1, single piece door, left open
Controller specifications
Accuracy: Temperature ±0.1℃ + 1digit , humidity ±1%RH + 1digit.
Resolution: temperature ±0.1 ℃， humidity ±0.1%RH
Temperature slope: 0.1~9.9 can be set.
With upper and lower limit standby and alarm function.
Display the current program number, number of segments, remaining time and number of laps
Temperature and humidity program setting value is displayed in a circular curve, with instant display of program curve execution function
Separate program editing screen, at least 4 temperature and time steps can be input on each page
Program capacity and control function.
Program group: 120 PATTENs max.
Available memory capacity: 1200 SEGMENTS.
Repeatable commands: up to 999 times for each command.
SEGMENTS time setting 0~99Hour59Min.
Power
380V 50HZ 20A 3∮ 4wire
Weight
295KG
Dimension
eg. 225L 1330*940*1670 mm （D*W*H）
OUR BROCHURE
